Metal Plate Systems - Manual Feed Dot Matrix Systems
Manual Feed Dot Matrix Systems
Metal Dot Matrix 1000
Available options: Output hopper: side eject or FIFO elevator (First In - First Out).
Character fonts: Embossing or indenting: Simplex1, Simplex3, OCRB1,Block, Block USA, Double Block, Double Long Block, Maxi Block; negative embossing (Elite Dog Tag).

Interface: Serial RS232 port.

Protocols: CIM, Xon-Xoff and Multiembosser.
Electrical requirements: 117 V / 60Hz - 230 V / 50 Hz
Feeding System Fonts: Standard Windows fonts including special characters and symbols.

Input hopper capacity: manual feeding.

Output hopper capacity: manual feeding

Plates dimensions:
                                 Width: min 30 mm - max 115 mm
                                 Height: min 21 mm - max 90 mm
                                 Thickness 0.4 ÷ 0.9 mm
Logo dimensions: Max area about 84 cm2.
Logos: Up to 2 at a time, resident in equipment.
Stamping area: Full plate except 1 mm from the top and left/right edges and 7 mm from the bottom edge. Avoid the edges in order to not damage the stylus.
Stamping pressure: Adjustable depending on material stamped.
Stylus: Widia
Memory and Data Data format: 50 fields of 80 characters each (Name, Fixed data, Counters, etc.)
Storable formats: 10 with formatted downloading.
Software/Firmware: : SWORD PC application proprietary software. Automatic date field; plate archive; DBIII, DBIV, Excel, MS Access file compatibility. Self diagnostic, automatic repetition of faulty plate personalisation, clearable and non-clearable counters, set-up procedures (via external keyboard).
Miscellaneous: 2-line by 40 character LCD display for diagnostic visualisation. Lithium back-up battery (warning of low battery level on LCD). Security operation with key lock. Emergency stop RED button. Machine state indicator lamps. LCD Edit (via external keyboard).
Operating temperature: 5C ÷ 40C/41F ÷104F
Performance: Depending on font and size (e.g.: ht 6 mm = 1 character/4 seconds).
Physical Dimensions(WxDxH): 630x740x380 mm
Power consumption: 100 watt
Relative humidity: 30% - 90% non condensing
Weight: 55 Kg

Reliable stylus stamping for logos, Windows fonts and special characters of all sizes
Easy manual or automatic loading and unloading. New innovative 'single point access' manual feed solution
Near end input / near full output hopper plate sensors for continuous production
Latest generation electronics with FLASH memory technology (accessible via external service port)
Stamps special characters such as country specific characters and symbols.
Stamps up to two logos at a time in addition to text. Variable logo orientation.
Suitable for a variety of metals, including stainless steel, aluminum, copper and brass.

Kit SDK Metal - Software Development Kit.